Setting Display Color Mode; Setting Brightness Mode; Setting Contrast Mode - Cobra 29 LX CAMO User Manual

Operation
Setting Display

Setting Display Color Mode

Color Mode
1
Press Menu/Enter knob and scroll down to select
Display Color.
NB/ANL
2
2 3
1.5
NB/ANL CAL
SWR
TX
ANL
RX
S/RF
S/RF
RF
SWR
CAL
3 5 7 9
1
SIG +30dB
SWR /CAL
Press and release Menu/Enter to set the color.
VOL SQ DYNAMIKE
3
OFF MIN
Rotating Menu/Enter knob clockwise changes the
display color from green to blue to amber to red
then back to green.
NB/ANL
4
Note
2 3
1.5
NB/ANL CAL
SWR
TX
ANL
Select EXIT to return to
RX
S/RF
S/RF
RF
main menu. Press Dim/Escape
SWR
CAL
button to return to CB mode. 3 5 7 9
1
SIG +30dB
SWR/CAL
Press Menu/Enter knob or escape button again
VOL SQ DYNAMIKE
to exit routine.
OFF MIN
20
CH 9/
SCAN
WX AUTO SCAN
DISPLAY COLOR MEM SCAN
BRIGHTNESS
MEM WX !
RF GAIN DELTA TUNE T BACK
MIN MAX OFF
CH 9/
TURN CH KNOB TO SCAN
MEM SCAN
SET COLOR
EXIT
MEM WX !
RF GAIN DELTA TUNE T BACK
MIN MAX OFF

Setting Brightness Mode

Press Menu/Enter knob to select Set Brightness
Rotate Menu/Enter knob clockwise to Select
Brightness. Press Menu/Enter knob to select
Day-Bright. Turn Menu/Enter clockwise to
increase brightness and turn counter-clockwise to
decrease brightness.
19
ESC
SWR
CAL
To set the day bright level, turn the Menu/Enter
knob clockwise to a desired setting and then
press Menu/Enter. To set the Night-Dim level,
repeat instructions above then select Night-Dim.
TURN CH KNOB TO
SET LEVEL
Press Menu/Enter knob again to exit routine.

Setting Contrast Mode

19
Press Menu/Enter knob and rotate clockwise to
select Set Contrast. Press Menu/Enter knob
again and rotate clockwise to increase contrast,
ESC
counter-clockwise to decrease contrast.
SWR
Press Menu/Enter knob to set contrast.
CAL
TURN CH KNOB TO
SET CONTRAST
Press Menu/Enter knob again to exit routine.
Operation
Setting
Brightness
Mode
Note
If an attempt is made to
exceed the highest or lowest
brightness levels, 1 error beep
will be heard.
Note
Exit will return to menu mode.
ESC will exit and return to CB
Standby.
Note
To select day or night levels,
press and release Dim/Escape
button once levels are set.
Note
To toggle from day to night
settings, see page 24.
Setting
Contrast Mode
Note
If an attempt is made to
exceed the highest or lowest
contrast levels, 1 error beep will
be heard.
21
Weather Auto