Brakes - Daewoo Kalos User Manual

3–18 DRIVING YOUR VEHICLE
If the MIL indicator stays on after start-
ing the engine and the transaxle cannot
be shifted, use this procedure:
1. Turn ignition OFF.
2. Remove key from the ignition.
3. Insert the key gently into the shift
lock release slot on the center con-
sole to the front of the shift position
indicator.
4. Shift the transaxle to NEUTRAL.
5. Replace the key in the ignition and
start the engine.
6. Move the selector lever to the desired
position and drive to the nearest au-
thorized repairer.
Ask the authorized repairer to check
and repair your vehicle.

BRAKES

The braking system is designed for brak-
ing performance under a wide range of
driving conditions.
Your vehicle is equipped with front disc
and rear drum brakes and a dual cir-
cuit braking system.
If one brake circuit should fail, the ve-
hicle can still be stopped with the re-
maining circuit, however, stopping dis-
tance will be increased and more brake
pedal pressure will be required.
v v
v v v
WARNING
If one of circuit fails, the brake pedal
must be pressed with greater pedal
pressure and the braking distance is
increased.
• Have the brake system checked
and repaired by a authorized re-
pairer immediately.
v v v v v
WARNING
If the brake pedal can be pressed fur-
ther than normal, the brakes may be
in need of repair.
• Consult your authorized repairer
immediately.
v v v v v
CAUTION
• Do not drive with your foot rest-
ing on the brake pedal.
Doing so will accelerate wear to
brake components. The brakes may
also become overheated, resulting in
longer braking distance and an un-
safe condition.