Switching The Rds Function On/Off; Browsing Through Broadcasting Networks (Only Fm); Automatic Seek Tuning; Tuning Into Stations Manually - Daewoo Kalos User Manual

4–20 CLIMATE CONTROL AND AUDIO SYSTEM

Switching The RDS Function ON/OFF:

To use the RDS functions (AF and
REG), press the RDS button (3).
If you activated the RDS function,
"RDS" lights up in the display.
Selecting the frequency range / memory
level
This unit can receive programmes
broadcast over the FM frequency range
as well as the MW and LW (AM)
ranges.
There are three preset memory levels
for the FM frequency range (FM 1, FM
2 and FMT) and one for each of the
MW and LW ranges.
You can store five stations on each
memory level.
To switch between the memory levels
or frequency ranges,
briefly press the AM/FM button (15)
repeatedly until the required fre-
quency range / memory level is dis-
played.
Tuning into a station
There are various ways of tuning into
a station.

Automatic Seek Tuning:

Press the B or Y button (9).
The unit tunes into the next receivable
station.

Tuning Into Stations Manually:

You can also tune into stations manu-
ally.
Press the << or >> button (9).
NOTE
You can only tune into stations
manually if the RDS function is de-
activated.
Browsing Through Broadcasting Net-
works (Only FM):
If a radio station provides several
programmes (e.g. Radio1, Radio2,
Radio3, etc.), you have the option of
browsing through its so-called "broad-
casting network".
NOTE
The RDS function must be activated
before you can use this feature.
To switch to the next station on the
broadcasting network,
press the << or >> button (9).
When using this feature, you will only
be able to switch to stations that you
have received once already. To do so,
use the scan or Travelstore function.