Scanning Receivable Stations (Scan); Setting The Scantime; Programme Type (Pty); Pty-Eon - Daewoo Kalos User Manual

4–22 CLIMATE CONTROL AND AUDIO SYSTEM

Scanning receivable stations (SCAN)

You can briefly play (scan) all the re-
ceivable stations. You can set the scan-
ning time to between 5 and 30 seconds
in the menu.
Starting Scan:
Briefly press the SCAN (TS) button
(16).
Scanning begins. "SCAN" appears
briefly in the display followed by a
flashing display of the current station
name or frequency.
Stopping Scan and continuing listening
to a station:
Press the SCAN (TS) button (16).
Scanning is stopped and the station that
was tuned into last will remain active.

Setting the scantime

Press the MENU button (12).
Keep pressing the B or Y button (9)
until "SCANTIME" appears in the
display.
Set the required scantime using the
<< or >> button (9).
When you have finished making your
changes,
press the MENU button (12) twice.
NOTE
The set scantime also applies to cas-
sette (logic deck only) and CD
changer mode.

Programme type (PTY)

Besides transmitting the station name,
some FM stations also provide informa-
tion on the type of programme that they
are broadcasting. Your radio can re-
ceive and display this information.
For example, the programme types can
be:
CULTURE TRAVEL JAZZ
SPORT NEWS POP
ROCK CLASSICS
Using the PTY function, you can di-
rectly select stations of a particular
programme type.

PTY-EON

If you specify the programme type and
start seek tuning, the unit will switch
from the current station to a station of
the selected programme type.
NOTE
If no station is found that corresponds
to the selected programme type, you
will hear a beep and "NO PTY" ap-
pears briefly in the display. The ra-
dio will then retune to the station that
you listened to last.