Advertisement
J5 Quick Ref 5-15-07
5/15/07
12:29 PM
2) DAILY PREPARATION
1. Fill fresh water in tank and check bean container.
2. Push On/Off Button. HEATING.
cup under the coffee spouts and push the Rinse Button.
RINSING. READY.
3) PRE-WARMING CUPS / HOTTER COFFEE
• Place cup under frother. Push the Hot Water Button.
• Let 2 to 3 oz. of water pre-warm the cup. Discard.
For hotter coffee see Operating Instructions, pg. 14-15.
4) COFFEE AND ESPRESSO
Four pre-set coffee buttons: 1 ESPRESSO, 2 ESPRESSI,
1 COFFEE, 2 COFFEES. These buttons are pre-set for
strength (four settings), cup size (1 to 8 oz. per cup) and
temperature (HIGH, NORMAL). For details see Operating
Instructions page 12, Factory Settings.
READY
• Place your pre-warmed cup(s) under the coffee spouts.
• Push one of the coffee buttons. The J5 will grind and brew
the coffee and return to READY.
5) OVERRIDING STRENGTHS AND VOLUME
Just before pushing one of the coffee buttons you can override
the strength by turning the Rotary Dial. The display shows
MILD, NORMAL, STRONG, XSTRONG. The 2-cup buttons
always brew in
XSTRONG.
Now push one of the coffee
buttons. Turning the dial during brewing lets you override the
cup size as shown in the display. Cup size for 2-cup buttons
is shown per cup!
Chapter 17.2, pg. 24 explains how to re-program all buttons.
6) CAPPUCCINO AND LATTE / FROTHXPRESS SYSTEM
The J5 comes with two different frothing systems: The
frothXpress (attached) and Dual Frother Plus (in storage
compartment).
• Remove small red cap of the frothXpress. Insert black tip
of flexible hose (Welcome Pack) and insert the other end
into your cold milk container (pg. 6, Fig.15).
• Place your cup underneath the frothXpress.
Frothing and steaming milk
for CAPPUCCINO:
• Position the DIAL between
12 and 2 o'clock.
Steaming milk for LATTE
(no or very little froth):
DIAL
• Position the DIAL between
4 and 6 o'clock.
• Push the Steam Button.
HEATING. After a few
seconds. READY.
• Push the Steam Button again. STEAM.
The J5 siphons the cold milk, heats and froths it directly
into your cup. After 20 seconds it will stop automatically.
During frothing/steaming you can change the steam
Page 2
duration by turning the Rotary Dial from 3 to 120 seconds.
When steaming stops you can push the steam button
PRESS
RINSE. Place a
again to add more frothed milk or to prepare the next cup
with frothed milk.
• Move the cup(s) underneath the coffee spouts and push
the 1-cup or 2-cup Espresso Button to add the espresso.
Using the Dual Frother (see Operating Instructions, pg. 19)
7) HOTTER MILK
The milk is hotter in the 2 and 4 o'clock position than in the
12 and 6 o'clock position. If you need hotter milk:
• After frothing/steaming has stopped, turn the DIAL of the
frothXpress to the 3 o'clock position (steam only). This will
prevent any additional milk from entering your cup.
• Raise the cup with the frothed milk so that the chrome
nozzle of the frothXpress is immersed.
• Push the Steam Button again. STEAM. Steam will increase
your milk temperature. Push the Steam Button to stop.
Warning: if you steam too long, the milk might boil.
8) HOT CHOCOLATE AND CAFE MOCHA
Add chocolate syrup to your cold milk and stir well. Then
follow the steps in chapter 6, above. Adding a shot or two of
espresso creates a Café Mocha.
9) TEA, CAFE AMERICANO, PRE-WARMING CUPS
Place a cup underneath the frother and push the Hot Water
Button. Hot water will be released. Use to pre-warm your
cups and to make tea. Café Americano: one or two shots
espresso plus 2 to 4 oz. of hot water.
10) CLEANING THE FROTHXPRESS
Quick Rinse (within an hour after using the frothXpress)
READY
• Place a cup underneath the frothXpress
• Place a cup with cold water next to the J5 and insert the
other end of the milk hose.
• Push the Steam Button. HEATING. READY.
• Push the Steam Button again. Steam/water will clean the
frothXpress.
• After a few seconds push any beverage button to stop.
Frothing
range
Thorough Cleaning
Milk fat can build up inside the
12 to 2 o'clock
frothXpress. The J5 comes with a
Steam only
bottle of milk fat dissolver
no siphoning
(Cappuccino Cleaner). This is fast,
Steaming
thorough, fool proof and easy.
range
• Remove the frothXpress from the
4 to 6 o'clock
steam nozzle and take it apart.
Chrome
Nozzle
• Place all parts including the hose
in a cup with water and add just
one capful (15m l / 1/2 oz.) of the
concentrate. Let sit for ten
minutes or overnight.
• Rinse all parts under fresh water and assemble.
11) INSTALLING /ACTIVATING THE CLEARYL FILTER
Important: Never install the cartridge before or during
"First Time Ever Preparation".
READY.
1. Push and hold the Rotary Dial until the display
shows
RINSE.
2. Turn the Rotary Dial until display shows
3. Push the Dial. The display shows
4. Turn the Dial. The display shows YES. Push the
dial to confirm. OK.
5.
INSERT
RINSE. The Rinse button illuminates.
6. Unpack the Clearyl filter and rinse under water.
Extension
Rod
7. Attach Extension Rod to filter.
8. Remove the water tank, make sure it is empty.
9. Pull-up the cartridge holder and insert the
cartridge with the tapered end down into the water
container.
10. Make sure it fits securely inside the fins.
11. Close cartridge holder.
12. Fill water tank with fresh cold water and replace.
13. Place a 20 oz. container under the steam nozzle.
14. Press the Rinse Button.
15. Cold water is pushed through the filter and the
frother for 90 sec. HEATING. READY.
The filter is now activated. The J5 will automatically
remind you when to replace the filter.
12) REPLACING THE CLEARYL FILTER
When display shows
READY FILTER
replace the filter.
Venting tip
• Push the Rinse button. CHANGE.
• Remove the water tank. Remove the old filter and
detach the extension rod.
• Continue with steps 6 through 15 above.
13) CLEANING WITH SPECIAL TABLET
This cleaning cycle removes coffee oils inside the
machine. This message will appear after 200 cups of
coffee:
CLEAN /
READY. Takes only 15 minutes!
Important: Only use the special white round cleaning
tablet. The J5 comes with a pack of two tablets.You
FILTER
–.
NO
–.
FILTER
RINSING.
it's time to
Advertisement
