Activating The Downloaded Images And Animations - JVC KD-LH3100 Instructions Manual

7
To delete more files, repeat from steps
8
Press D (DISP) to resume the source
indication screen.
Activating the downloaded
images and animations
Activating the animations stored for
opening and ending screens
After the unit turns on or before the unit turns off,
you can see preset animations on the display.
These are called opening screen and ending
screen. You can use your own edited animations
for these opening and ending screens.
• Opening and ending screen will not be shown if
the "KeyIn CFM" setting is set to "Short" or "Off."
(See page 41.)
• If no animation is stored in "PowerOn" and
"PowerOff," "Opening" and "Ending" cannot be
selected as a PSM item.
1
Press and hold SEL (select) for more
than 2 seconds so that one of the
PSM items appears on the display.
(PSM: see pages 39 and 40.)
2
Press number button 1 to select
"MOVIE"—Movie category of the
PSM settings.
The "Graphics" setting screen appears on
the display.
3
5 6
and .
Select "Opening" (opening screen
setting) or "Ending" (ending screen
setting).
Ex.: When you select "Opening"
4
Select "User."
• Default: Factory-preset animation is used.
• User:
5
Finish the setting.
Activating the graphic screen using
either picture or movie
Using this setting, you can change the graphic
displays. These graphic screen appears if no
operation is done for about 20 seconds.
• If no image is stored in "Picture," or no
animation in "Movie," "UserPict.," "UserMovie,"
and "UserSlide" cannot be selected as a PSM
item.
1
Press and hold SEL (select) for more
than 2 seconds so that one of the
PSM items appears on the display.
(PSM: see pages 39 and 40.)
Your own edited animation is
used.
CONTINUED ON THE NEXT PAGE
37