DeLonghi EDF 495 ST User Operating Instructions Manual page 17

6
IMPORTANT
–
The appliance should be installed by a QUALIFIED INSTALLATION TECHNICIAN.
The appliance must be installed in compliance with regulations in force.
You need the following housing area to fit your oven correctly.
The double oven is designed to fit into a cabinet of 600 mm width.
The double oven can be built in the kitchen units, but you must ensure that it is properly
ventilated.
In the diagram the appliance is ventilated by means of the space in the top of the kitchen
cabinet.
Lift the appliance into position onto the shelf, taking
care NOT to lift it by the door handles.
If you open the oven doors, you will see some screw
holes.
The oven should then be secured to the housing by
fitting screws into these holes.
Remember the housing should not be free standing but
be secured to the wall and/or adjacent fittings.
Dimensions
Oven
(mm)
888
Height
Width 595
Depth 564
– The appliance must be
housed in heat resistant
units.
– The walls of the units
must be capable of
resisting temperatures
of 75 °C above room
temperature.
I
N S TA L L AT I O N
Housing
877
560
555 min.
Fig. 6.1
17