Kreg KMS7200 Instruction Manual page 3

Thank you for purchasing KREG components. All products have been
designed to ensure safe and effi cient operation when installed and used properly. We
think you will agree that our Precision Band Saw Fence is the best currently available.
Warning
- Woodworking machines are dangerous and can cause personal injury if not used properly.
- Read safety instructions and operating instructions for your machine completely before using products.
Using this system before understanding its safe and proper use could result in serious injury to the operator.
- Warning: Failure to follow these rules may result in serious personal injury.
- For your own safety, read instruction manual before operating the tool. Learn the tools application and
limitations as well as the specifi c hazards peculiar to it.
- Keep all guards and safety devices in proper place while using these products.
- Always wear safety glasses.
- Keep hands well away from the rotating blade when operating machine.
- Avoid awkward hand positions, where a sudden slip could cause contact with rotating blade. Never reach behind
the rotating blade with either hand to clear the area of debris.
Warning: This product contains one or more chemicals known to the State of California to cause cancer and birth defects or
other reproductive harm. Wash hands after handling.
Kickbacks
Beware of kickbacks; they can cause serious injury. A kickback occurs when the workpiece binds up while
being cut, causing it to twist, jump, or become airborne.
To avoid kickbacks:
- Always use sharp band saw blades.
- Keep machine in proper alignment and good working condition.
- Work must always be held securely against the table and fence.
- Keep guides in their proper position and in good working order.
- Always support longer boards on both the infeed side and the outfeed side of the blade.
Warranty
- Kreg components are fully guaranteed for one year from date of purchase.
- Kreg will replace or repair, at no charge to the customer, any product that fails within the warranty period.
- Kreg will service Kreg components beyond the warranty period at a reasonable cost to customer.
- Any neglect, misuse or usage of the Tools in a fashion not recommended by Kreg will void all warranties.
As with all machinery, there are certain hazards involved with operation and use of the band saw. Using the
machine with respect and caution will considerably lessen the possibility of personal injury. However, if normal
safety precautions are overlooked or ignored, personal injury to the operator may result.
This system was designed for certain applications only. Kreg strongly recommends that this system NOT
be modifi ed and/or used for any application other than for which it was designed. If you have any questions
relative to its application, DO NOT use the Tools until you have written Kreg Tool and we have advised you.
Precision Band Saw Fence Guidelines
R
Safety Guidlines
2