Other Main Functions; Changing The General Settings (Psm) - JVC KD-G498 Instructions Manual

OTHER MAIN FUNCTIONS

Changing the general settings
(PSM)
You can change the items listed in the table
below by using the PSM (Preferred Setting
Mode) control.
Basic Procedure
1
Press and hold SEL (select) for more
than 2 seconds so that one of the
PSM items appears on the display.
(See below.)
2
Select the PSM item you want to
adjust.
Preferred Setting Mode (PSM) items
• For detailed operations of each PSM items, refer to the pages listed in the table.
Indications
DEMO Display demonstration
CLOCK H Hour adjustment
CLOCK M Minute adjustment
DIMMER Dimmer mode
SCROLL Scroll mode
TAG DISP Tag display
AMP GAIN Amplifier gain control
24
3
Adjust the PSM item selected.
4
Repeat steps 2 and 3 to adjust the
other PSM items if necessary.
5
Finish the setting.
Selectable values/items
DEMO OFF DEMO ON
1 – 12
00 – 59
OFF ON
ONCE AUTO
OFF
TAG OFF TAG ON
LOW PWR HIGH PWR
Factory-preset See
settings page
DEMO ON 8
1 (1:00)
9
00 (1:00)
OFF 25
ONCE 25
TAG ON 25
HIGH PWR 25