Sunny Boy SWR 2500U Installation And Operator's Manual page 17

Sunny Boy 2500U
AC conduit and wiring
•
Connect the main 240 Volt AC-breaker box to the Sunny Boy by a 1/2" conduit.
•
Insert the conduit fitting in the very right opening of the Sunny Boy. Fasten the
fitting on the inside of the Sunny Boy with the nut.
•
Pull the wires through the conduit into the interior of the Sunny Boy.
•
Connect the wire L1 to the terminal labeled L in the Sunny Boy (see Fig. 2.8).
•
Connect the wire L2 to the terminal labeled N in the Sunny Boy.
•
Connect the equipment-grounding conductor to the terminal labeled PE in the
Sunny Boy.
•
Torque wires with torque of 35 in-lb.
•
Ensure all connections are correctly wired and properly torqued.
SB2500U-11:NE
http://www.wholesalesolar.com/inverters.html
L1
Fig. 2.8: AC connection socket
17
- -
http://www.wholesalesolar.com/inverters.html
Installation and Operator's Manual
L2
Ground
SMA Regelsysteme GmbH