Sunny Boy SWR 2500U Installation And Operator's Manual page 10

Sunny Boy 2500U
The Sunny Boy inverter is mounted on the back side with the three metal straps.
Drilling Template for the Sunny Boy 2000, 2500, 3000
top
Fig. 2.2: Picture of drilling template - original template in appendix
SB2500U-11:NE
http://www.wholesalesolar.com/inverters.html
distance between the holes on the top 217.50 mm
+
position of the holes on the top
(for 6 mm screws)
Total width of the Sunny Boy: 434.50 mm
Please note:
mount the Sunny Boy Never mount the
tilted to the back or Sunny Boy tilted
vertical! to the front!
bottom hole
(6 mm diam.)
10
-
http://www.wholesalesolar.com/inverters.html
Installation and Operator's Manual
+
-
+
SMA Regelsysteme GmbH