Overriding The Optional Starter Kill - Python 1401 Owner's Manual

Placing the remote into the remote pair mode:
1.
Press and hold the
f
button for
8
seconds. If the transmit
LED
flashes at
3 seconds, disregard and continue to hold.
2. Wait for
th.~
Transmit
LED
to light solid. Release the
f
button.
3. Press the
~:)
button for 1 second. The transmit
LED
flashes 3 times.
4. Within
5
seconds, press the
Q
button.
5.
The vehicle horn honks. You have now successfully learned the remote to
the vehicle remote start system.
To exit remote pairing:
• Press and release the
f
button one time, and then press and hold it for
1.5 seconds. The transmit
LED
turns off.
> Overriding the optional Starter kill
To bypass the optional Starter kill without a remote control:
Use the button on the Control Center Isee diagram below) to bypass the
system. You can bypass the system only if you have the vehicle key.
To check proper operation:
1.
While the vehicle is locked, open the door. Immediately insert the key
into the ignition and turn it to the Run or On position. lall the indicators in
the dash turn on)
2. Press and release the Control button one time. The
LED
on the Control
Center will stop flashing and the optional Starter kill is bypassed. You
can now start the vehicle with the key.
Note: The override feature allows you to select a specific number of presses
needed to disable the system. If the override button has been programmed to
a new number of presses by your authorized dealer, that number should be
indicated below.
Override button presses _
16 ©
2009 Directed Electronics. All rights reserved.