Tuning In To A Preset Dab Service - JVC KD-DV5000 Instructions Manual

4
Press and hold the number button
(in this example, 1) you want to store
the selected service into for more
than 2 seconds.
1
The display pattern automatically changes to the
non-animation display and the preset number
flashes (then the previous display pattern
resumes).
5
Repeat the above procedure to store
other DAB services into other preset
numbers.
Notes:
• You can only preset primary DAB services. If you
store a secondary service, its primary service will
be stored instead.
• A previously preset DAB service is erased when a
new DAB service is stored in the same preset
number.
Tuning in to a preset DAB
service
You can easily tune in to a preset DAB service.
Remember that you must store services first. If
you have not stored them yet, "Storing DAB
services in memory" on pages 74 and 75.
1
Select the DAB tuner.
1 Press SRC (source)
SRC
repeatedly to select the DAB
tuner.
2 Press and hold SRC.
Each time you press and hold
the button, the DAB band
changes (DAB1 – DAB3).
2
Select the number (1 – 6) for the
preset DAB service (primary) you
want.
1 2 3
Note:
If the selected primary service has some secondary
services, pressing the same number button repeatedly
will tune in to the secondary services.
Selecting a preset service using the
preset service list
If you forget what services are stored in what
preset number, you can check the preset service
list, then select your desired service on the list.
1
Select the DAB tuner.
1 Press SRC (source)
SRC repeatedly to select the DAB
tuner.
2 Press and hold SRC.
Each time you press and hold
the button, the DAB band
changes (DAB1 – DAB3).
CONTINUED ON THE NEXT PAGE
4 5 6
75