Storing Stations In Memory - JVC KD-DV5000 Instructions Manual

Storing stations in memory

You can use one of the following two methods to
store broadcasting stations in memory.
• Automatic preset of FM stations: SSM (Strong-
station Sequential Memory)
• Manual preset of both FM and AM stations
FM station automatic preset: SSM
You can preset 6 local FM stations in each FM
band (FM1, FM2, and FM3).
1
Select the FM band (FM1 – 3) you
want to store FM stations into.
1 Press SRC (source)
SRC
repeatedly to select the tuner.
2 Press and hold SRC.
Each time you press and hold
the button, the band changes.
FM1 FM2
Note:
This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to
an FM broadcast.
2
Start automatic preset.
1 Press MODE (M) to enter the functions
mode.
"Mode" appears on the display.
MODE
M
Local FM stations with the strongest signals are
searched and stored automatically in the band
FM3 AM
number you have selected (FM1, FM2, or FM3).
These stations are preset in the number buttons
—No.1 (lowest frequency) to No.6 (highest
frequency).
2 Press and hold number button 5 while
"Mode" is still on the display.
1 2 3
Then
"–SSM–" appears, then disappears when
automatic preset is over.
4 5 6
13