Tuning In To A Preset Dab Service - JVC KD-LH1000R Instructions Manual

5
Press and hold the number button
(in this example, 1) you want to store
the selected service into for more
than 2 seconds.
The display pattern automatically changes to the
non-animation display and the preset number
flashes (then the previous display pattern resumes).
6
Repeat the above procedure to store
other DAB services into other preset
numbers.
Notes:
• You can only preset primary DAB services. If you store
a secondary service, its primary service will be stored
instead.
• A previously preset DAB service is erased when a new
DAB service is stored in the same preset number.
44
Tuning in to a preset DAB
service
You can easily tune in to a preset DAB service.
Remember that you must store services first. If
you have not stored them yet, see page 43.
Selecting a preset service directly
1
Select the DAB tuner.
Each time you press and
hold the button, the DAB
tuner and the FM/AM tuner
are alternately selected.
2
Select the DAB band (DAB1, DAB2 or
DAB3) you want.
Each time you press the
button, the DAB band
changes as follows:
DAB1
3
Select the number (1 – 6) for the
preset DAB service (primary) you
want.
Note:
If the selected primary service has some secondary
services, pressing the same number button repeatedly
will tune in to the secondary services.
DAB FM/AM
DAB2 DAB3