General Information; Introduction; Unpacking And Inspection; Design Data - Cornelius CH1001-A Installation Manual

Hide thumbs

Table Of Contents

Table of Contents

NTRODUCTION

The Cornelius "CH" Series Recirculating Water Chiller is designed to provide an accurate, reliable, and user-

friendly system for cooling a continuous flow of pure liquid and keep that liquid at a constant temperature in

various closed loop or tank cooling applications.

The "CH" Series Chiller consists of an air–cooled refrigeration system housed in a sturdy sheet metal frame and

cabinet. A standard pump and insulated water reservoir package provides a complete water cooling and

circulating system.

The "CH" Series Chiller is designed to operate in a clean laboratory or industrial environment where ambient

temperatures range from 40 to100° F (5 to 38° C). With proper installation, operation, and maintenance, the "CH"

Series Chiller will provide years of trouble free service.

NPACKING AND

This unit was thoroughly inspected before leaving the factory and the carrier has accepted and signed for it. Any

damage or irregularities should be noted at the time of delivery and immediately reported to the carrier. Request

a written inspection report from the Claims Inspector to substantiate any necessary claims. In the event that an

immediate replacement is necessary, please contact Cornelius Chiller Sales at 1–800–551–4423.

ESIGN

ATA

Cooling Capacity:

BTU/hr (W) at 80° F (27° C) and 70° F

(21° C)

Compressor Horse Power

Electrical Data:

Voltage/Phase/Hertz/Amperage

Refrigerant Type:

Reservoir Capacity (Gal)

Dimensions:

Depth (inches)

Width (inches)

Height (inches)

Process Connections

Optimum Process Liquid Flow GPM

(Liters/Min)

Condenser Air Flow (CFM)

ATA

LATE

NFORMATION