Listening To The Ipod/Iphone; When Connected With The Usb Cable - JVC GET0643-001A Instruction Manual

Listening to the iPod/iPhone

You can connect the iPod/iPhone using the following cable or adapter:
Cable/adapter
USB 2.0 cable (supplied with the iPod/iPhone) to the
USB input jack on the control panel
Interface adapter for iPod, KS-PD100 (not supplied) to
the CD changer jack on the rear of the unit
• Disconnecting the iPod/iPhone will stop playback. Press SRC to listen to another playback source.
• For details, refer also to the manual supplied with your iPod/iPhone.
Caution:
• Avoid using the iPod/iPhone if it might hinder your safety while driving.
• Make sure all important data has been backed up to avoid losing the data.

When connected with the USB cable

There are 2 control terminals in "USB-IPOD" source.
• "HEAD MODE": control by this unit.
• "IPOD MODE": control by the connected iPod/iPhone.
Preparation: Select the controlling terminal, "HEAD MODE" or "IPOD MODE" for iPod playback:
• Press and hold BACK button.
• Make the selection from "IPOD SWITCH" setting, see page 29.
The operations explained below are under "HEAD MODE."
1
2
Selecting a track from the menu
1
Enter the main menu.
2
Select the desired menu.
[Turn]
20
Select "USB-IPOD."
Playback starts automatically.
Select a song.
=
[Press]
To operate
See "When connected with the USB cable" below.
See "When connected with the interface adapter" on
page 21.
Ô
PLAYLISTS ARTISTS
Ô
SONGS PODCASTS
Ô
COMPOSERS
3
Select the desired track.
[Turn]
• To return to the previous menu, press BACK.
Ô Ô
ALBUMS
Ô Ô
GENRES
AUDIOBOOKS
=
[Press]