Onkyo TX-NR838 Basic Manual page 18

1 2 3
G H
Rear Panel
RI REMOTE CONTROL jack: An Onkyo product with RI
1
jack can be connected and synchronized with this unit.
FM ANTENNA jack (75 Ω) and AM ANTENNA
2
terminal: The supplied antennas are connected.
COMPONENT VIDEO IN and OUT jacks: Component
3
video input/output jacks
ETHERNET port: Used for LAN connection
4
RS232 port: Connected to the home control system. ( ¼ )
5
IR jack: Connected to the multiroom remote control kit.
6
( ¼ )
12V TRIGGER OUT jack: Allows you to connect a
7
device with trigger input jack in a separate room to
enable power link operation between the device and the
unit. ( ¼ )
¼ Special devices or cable connections are necessary to use the
¼
control functions 5 to 7. Contact the specialized stores for more
information.
18
4 5 6 7
I J
HDMI IN/OUT jacks: Digital video signals and audio
8
signals are transmitted between the unit and the
connected devices.
Wireless antenna: Used for Wi-Fi connection or when
9
using a Bluetooth-enabled device. Adjust their angles
according to the connection status.
AC INLET: The power cord is connected.
F
8 9
K L
90°
180°
90°
180°
F
M
DIGITAL IN COAXIAL/OPTICAL jacks: Digital audio
G
signals are input.
GND terminal: The ground wire of the turntable is
H
connected.
Composite video and analog audio jacks: Analog
I
video signals and audio signals are input.
MONITOR OUT V jack: Video signals are output to the
J
connected monitor or TV.
PRE OUT jacks: A power amplifier or subwoofer with
K
built-in amplifier is connected.
PRE/LINE OUT ZONE2/ZONE3 jacks: Audio output
L
jacks connected to the pre-main amplifier for multi-zone
playback in a separate room.
SPEAKERS terminals: Speakers are connected. To
M
use the Multi-zone function, connect the speakers in the
separate room to the ZONE2 speaker terminals.