Onkyo TX-NR838 Basic Manual page 16

1 2 3 4 5 6
G
Front Panel
Front flap
1
zON/STANDBY button: Turns the unit on or into
2
standby mode.
PURE AUDIO button and indicator: Switches to the
3
PURE AUDIO mode.
Remote control sensor: Receives signals from the
4
remote controller.
BLUETOOTH indicator: Flashes while pairing with a
5
Bluetooth-enabled device is in progress and stays lit
when pairing is completed.
Wi-Fi indicator: Stays lit while the unit is connected to
6
the wireless LAN router.
Input selector buttons: Switches the input to be
7
played.
16
7 8
H I J K L M
Display
8
MASTER VOLUME control and indicator: Allows you
9
to adjust the volume.
HYBRID STANDBY indicator: Lights if the unit enters
F
standby mode when the HDMI Through, network
standby or Wakeup from Bluetooth function is enabled.
PHONES jack: Stereo headphones with a standard plug
G
are connected.
ZONE 2 button, ZONE 3 button and OFF button:
H
Controls the multi-zone function.
TONE and Tone Level buttons: Adjusts the high tone
I
and low tone.
MONITOR OUT button: Allows you to select the HDMI
J
jack to output the video input signals that are input to
the unit.
N O P Q R S T U
9 F
2.
V W
DISPLAY button: Switches the information on the
K
display.
QUICK SETUP button: Displays the Quick Setup menu.
L
HOME button: Displays the Home menu.
M
Cursor buttons, TUNING l j button, PRESET
N
button and ENTER button: Moves the cursor and
confirms the selection. When listening to AM/FM
broadcasting, tune into the station with TUNING l j or
select the registered station with PRESET
RETURN button: Returns the display to the previous
O
state.
1.
d c
d c
.