Onkyo TX-NR838 Basic Manual page 17

DIMMER button (North American models): Switches
P
the brightness of the display.
RT/PTY/TP button (European, Australian and Asian
models): Can be used when receiving the station
transmitting text information.
MEMORY button: Registers or deletes a station.
Q
TUNING MODE button: Switches the tuning mode.
R
USB port: A USB storage device is connected so that
S
music files stored in it can be played.
Listening mode buttons: Allows you to select the
T
listening mode.
AUX INPUT HDMI/MHL jacks: An HD video camera or
U
MHL-enabled mobile device is connected. It is possible
to send video and audio of an MHL-enabled mobile
device.
AUX INPUT AUDIO/VIDEO jacks: A video camera or
such other device is connected.
WHOLE HOUSE MODE button: Controls the WHOLE
V
HOUSE MODE function to play the same source in all
the multi-zone connected rooms.
SETUP MIC jack: The supplied speaker setup
W
microphone is connected.
1 2 3
Display
Stays lit or flashes in the following conditions.
1
"Z2" ( ¼ ): Zone 2 is on.
"Z3" ( ¼ ): Zone 3 is on.
¼ Both "Z2" and "Z3" light when the WHOLE HOUSE MODE function is ¼
on.
"HDMI": HDMI signals are input and the HDMI input
selector is selected.
"ARC" (Audio Return Channel): Audio signals are input
from the ARC compatible TV and the TV/CD input
selector is selected.
"3D": Input signals are 3D.
"USB": "USB" input is selected and USB storage device
is connected.
• It will flash if the USB storage device is not
correctly connected.
"NET": "NET" input is selected and the unit is connected
to the network.
• It will flash if the connection to the network is not
correct.
"DIGITAL": Digital signals are input and the digital input
selector is selected.
Cursor indicators: NET or USB is controlled.
Stays lit while headphones are connected.
2
Stays lit while NET or USB is controlled.
3
Stays lit according to the type of input digital signals and
4
the listening mode.
Stays lit while Music Optimizer is enabled.
5
4
9
Stays lit or flashes in the following conditions.
6
"AUTO": Tuning mode is auto.
"TUNED": Receiving AM/FM radio.
•  flashes while tuning is automatically performed.
"FM STEREO": Receiving FM stereo.
"RDS" (European, Australian and Asian models):
Receiving RDS broadcasting.
"MUTING": Flashes when audio is temporarily muted by
7
pressing MUTING on the remote controller
Stays lit in the following conditions.
8
"SLEEP": Sleep timer has been set.
"ASb" (Auto Standby): Auto Standby is on.
"ch": Channel is being set.
"Hz": Crossover frequencies are being set.
"m/ft": Speaker distances are being set.
"dB": Speaker volume is being set.
Displays various information of the input signals.
9
Pressing DISPLAY displays the type of input digital
signals and the listening mode.
5 6 7
8
17