Routing - Yamaha 01V96i Quick Start Manual

01V96i Quick Start Guide
✦

ROUTING

In the [PAN/ROUTING] menu, the Selected Channel can be routed to any of the 8 Buses, to the Stereo Bus and to a
Direct Output. Move the cursor to the required bus number ([1-8], [S] for Stereo and [D] for Direct output) and press
[ENTER] to route the channel. The PAN indicators below each channel number in the LCD ensure that the PAN of
the channels will follow through to the Buses. This is particularly useful when using the Buses as stereo sub-groups
(like on a typical analog console).
Cursor
ENTER
Buses can be routed to Stereo (just like Sub-Groups on an analog console). To do this, press the [PAN/ROUTING]
button to view the BUS TO ST screen. Here Buses 1-8 can be routed, panned and mixed to the Stereo Bus. Use the cur-
sor keys, data wheel and [ENTER] switch to adjust the parameters.
Data wheel
Cursor
12/32