Specifications - Sprint Phone User Manual

1. Make sure the telephone is working.
2.
Check the Power LED to make sure your device is
getting power.
3.
Check the antenna to make sure it is tightly connected.
4.
Next move the Sprint Phone Connect to another
location within your home.
If, after taking the above steps you still don't have a dial
tone and the Signal LED is off, contact Sprint Customer
Support.

Specifications

Item Description
Air Interface CDMA2000 1X
RF Frequency 800MHz/1900Mhz
LED Indicator - 3 multi color
Power, Signal &
MODE/MSG
Interface - 2 RJ-11 Ports (bridged),
Max 4 REN
- DC power Jack
- Power ON/OFF Switch
- TNC Connector for
CDMA antenna with
GPS antenna
18 3A. Advanced Settings
Remarks
Dual band
Green, Red, Off
Special Feature AGPS for E911 Service
Automatic Sending Caller
ID(DTMF, Bellcore)
Tone Dial, No service, Howler,
Stutter, Menu OK, Menu
NOK
Call feature Hook Flash
Call Waiting
Call Forwarding
Three-way Calling
Battery Li-ion rechargeable battery
Capacity: 1800mAh
(Standard)
* Stand by time: >10 hrs
* Talk time: >1.5 hrs
Power Adapter - Input: AC100-240V, 50/
60Hz
- Output:5V
Dimension - Size: 165 X 158 X 26
(mm)
- Weight: 310g
Operating - Temperature: -10ºC ~
Condition 50ºC
- Relative humidity :
10~95%
- Air pressure : 86~106kpa
2000mA
With standard battery