Download Print this page

Replacing The Battery - AND XL-20 User Manual

Wireless activity monitor

Advertisement

Replacing the Battery

In the Devices Tab on wellnessconnected.com
you can check the battery level of your XL-20. If
the XL-20 icon is red, then the battery needs to be
replaced. Battery life will differ dramatically based
on your usage of the XL-20.
1. Using a
small Phillips
screwdriver,
remove the four
screws on the
bottom of the
XL-20.
Page E-7 | A&D Medical (Toll-Free): 1-888-726-9966
Replacing the Battery
2. Separate the
two halves by
pulling the clip
away from the
upper housing.
3. Using a flathead
screw driver,
lift up the
old battery
and discard
following local
battery disposal regulations.
4. Replace with a new CR2032 coin cell battery,
positive (+) facing up.
5. Reposition the back cover.
6. Replace the screws so they are tight, but do not
over-tighten to the point of stripping the threads.
A&D Medical (Toll-Free): 1-888-726-9966 | Page E-8

Advertisement

loading