Telestream General Pipeline System Setup Information Manual page 9

Systems Recommendations
General guidelines
•
CPU
•
Single or Dual channel systems - Dual Dual
Core 2.3Ghz CPU or faster
•
Three or Four channel systems - Dual Quad
Core 2.3Ghz CPU or faster
•
Four or Five channel - Dual Six Core 2.3Ghz
CPU or faster
•
RAM - 4GB RAM per channel
•
Operating System – Check Telestream web site
for the latest supported OS
•
Media Storage sustained read and/or write speeds
(separate from OS drive)
•
Capture only – 40MB/s per channel
•
Play out only – 60MB/s per channel
•
Transcode/Edit/Disk Buffering while Capture –
100MB/s per channel
All systems assume media storage local (internal or
1
direct attached) to the host system with adequate
storage to support 24 hours of content at the chosen
format, and drive array is less than 80% full without
serious fragmentation.
Edit while ingest and transcode while ingest workflows
require increased disk I/O performance to support the
additional read processes, and may require disk buffer
cache drive system (see Pipeline User Guide disk
buffering details).
Viewing HD preview stream(s) can consumes high
levels of CPU which may cause dropped frames. It is
recommended that preview be turned off during
capture.
www.telestream.net |
1
info@telestream.net | tel +1 530 470 1300
Specifications subject to change without notice. Copyright © 2014 Telestream, Inc.
Telestream, CaptionMaker, Episode, Flip4Mac, FlipFactory, Flip Player, Lightspeed,
ScreenFlow, Vantage, Wirecast, GraphicsFactory, MetaFlip, MotionResolve, and
Split-and-Stitch are registered trademarks and Pipeline, MacCaption, e-Captioning,
and Switch are trademarks of Telestream, Inc. All other trademarks are the property of
their respective owners.
June 2014
Pipeline
System Setup
9