Release Notes - CipherLab 1500 User Manual

RELEASE NOTES

Version Date
1.16 Dec. 18, 2012
1.15 Mar 02, 2012
1.14 Jul. 19, 2011
1.13 Nov. 23, 2010
1.12 Sep. 27, 2010
1.11 Apr. 14, 2010
1.10 Apr. 09, 2010
Notes
Modification: 2.1.1 Keyboard type added with No. 32 PCAT (Swiss)
& No. 33 PCAT (Danish)
New: 2.3.6 Output Format (Wand Emulation) setup barcodes
added
New: 3.1 Codabar added w/ security Level (High: 100490/Normal:
100491)
New: 3.7 Code 128 added w/ security Level (High: 100492/Normal:
100493)
New: Quick Start — One-Scan Setup Barcodes
Modified: 2.1.1 Activate Keyboard Wedge & Select Keyboard Type —
add #31 PCAT (Hungarian)
Modified: 3.10 GS1-128 (EAN-128) enabled by default
New: 3.5.5 Security Level (for Code 39)
Modified: 4.6.1 Edit a Concatenation of Barcodes — Code type for
ISBT 128 added
Modified: 5.5 Configuring Format — Define Transmission Sequence
(add Null Character Field)
Modified: 3.10 GS1-128 (EAN-128) — Cannot read when disabled
since firmware v1.10
Modified: Specifications — Power Adaptor
Modified: 1.11 Auto-Sense Mode (1500 Only) — add High Sensitivity
behavior
Modified: Introduction, Symbologies Supported — add support of
more RSS symbologies
Modified: 3.16 GS1 DataBar (RSS Family)
Modified: 3.16.2 GS1 DataBar Omnidirectional (RSS-14)
Modified: 3.16.3 GS1 DataBar Expanded (RSS Expanded)
Modified: 4.2 Character
Code/Normal Key
New: 5.4.5 Pause Field Setting
Modified: 5.5 Configuring Format — Define Transmission Sequence
(add Pause Field)
Specifications: add 1502
Modified: 2.1.1 Activate Keyboard Wedge & Select Keyboard
Type — add Turkish
Modified: 3.9.4 Security Level
New: Introduction — add 1500WA
Modified: Appendix III Keyboard Wedge Table — remove settings for
user-defined scan code
Modified: Appendix III Keyboard Wedge Table — provide examples
Substitution — add table for Scan