Table of Contents
Advertisement
Selecting preset sound modes
You can select a preset sound adjustment
suitable to the music genre.
Select the sound mode you want.
Each time you press the button,
the sound mode changes as
follows:
Ex.: When you select "BEAT"
Indication
For:
SCM OFF (Flat sound)
BEAT
Rock or
disco music
SOFT
Quiet
background
music
POP
Light music
Notes:
• You can adjust each sound mode to your preference,
and store it in memory.
If you want to adjust and store your original sound
mode, see "Storing your own sound adjustments"
below.
• To adjust the bass and treble reinforcement levels or
to turn on/off the super bass function, see page 10.
Storing your own sound
adjustments
You can adjust the sound modes (BEAT, SOFT,
POP) to your preference and store your own
adjustments in memory.
• There is a time limit in doing the following
procedure. If the setting is canceled before you
finish, start from step 1 again.
Preset values
BAS
TRE S.BASS
00
00
OFF
+2
00
ON
+1
–3
OFF
+4
+1
OFF
1
Call up the sound mode you want to
adjust.
• See on the left column for
details.
2
To adjust the bass or treble level.
1 Select "BAS" (bass) or "TRE" (treble).
2 Adjust the level.
To turn on or off the super bass function.
• See page 10 for details.
3
Repeat step 2 to adjust the other
items.
4
Press and hold SCM until the sound
mode you have selected in step 1
flashes on the display.
Your adjustment made for
the selected sound mode is
stored in memory.
5
Repeat the same procedure to store
other sound modes.
To reset to the factory settings, repeat the
same procedure and reassign the preset values
listed in the table on the left column.
11
Advertisement
Table of Contents
