Canceling The Display Demonstrations; Setting The Clock - JVC GET0248-001B Instruction Manual

Canceling the display
demonstrations
If no operations are done for about 20 seconds,
display demonstration starts.
[Initial: DEMO ON]
1
2
3
4
Finish the procedure.
To activate the display demonstration
In step 3 above...
8

Setting the clock

1
2
Set the hour and minute.
1 Select "CLOCK H" (hour), then
adjust the hour.
2 Select "CLOCK M" (minute),
then adjust the minute.
3
Finish the procedure.
To check the current clock time when the
power is turned off