Initializing Hdds - HIKVISION DS-7604-HI-ST User Manual

User Manual of Digital Video Recorder

10.1 Initializing HDDs

Purpose:
A newly installed hard disk drive (HDD) must be initialized before it can be used with your device.
Note: If there is uninitialized HDD existed in the device, the following message box pops up when the device
starts up.
Click to initialize it immediately or you can perform the following steps to initialize the HDD(s).
Steps:
1. Enter the HDD Information interface.
Menu > HDD>General
2. Select HDD to be initialized.
3. Click .
Lo-Call 1890 866 900
Figure 10. 1 Message Box of Uninitialized HDD
Figure 10. 2 HDD Information Interface
www.cctvireland.ie
139
shop@cctvireland.ie