Plan The Antenna Installation - TracVision HD7 Installation Manual

2

Plan the Antenna Installation

Before you begin, consider the following antenna
installation guidelines:
• The antenna must be mounted outside the
radar's beam pattern.
IMPORTANT!
Do not mount the antenna at the same level as
the radar because the radar's energy will
overload/damage the antenna's LNB.
• Minimize blockage. The antenna requires a
clear view of the sky to receive satellite TV
(see Figure 3). The fewer obstructions, the
better the system will perform.
• Make sure the mounting surface is wide
enough to accommodate the antenna's base
(see Figure 4). Also make sure it is flat, level
(within ±1°), strong enough to support the
antenna's weight (95 lbs (43 kg)), and rigid
enough to withstand vibration.
• Select a location that is as close as possible to
the intersection of the vessel's fore-and-aft
centerline and midships.
• The antenna must be located within 100 ft
(30 m) of the ACU.
4
Figure 3 Blockage from Obstruction
15° to 75°
Look Angle
Blocked!
Mast
Figure 4 Antenna Dimensions
35.02"
[90 cm]
6.0"
[15.2 cm]
12.0"
[30.5 cm]
Antenna
Vessel Platform
39.33"
[98.9 cm]
FWD
6.0"
[15.2 cm]
12.0"
[30.5 cm]
4X M10 X 1.5
Threaded Insert