Maintenance; Vacuum Cleaner Storage - Hoover vogue 5015PH Instruction Manual

Maintenance

Ensure the vacuum cleaner is not connected to the power supply when performing
any maintenance procedures. Use a damp cloth and mild detergent when cleaning
the appliance.

Vacuum Cleaner Storage

When not in use, ensure the cleaner is not connected to the power supply, and pull the power cable gently
out of the power socket. Press the automatic cord retract button to reel in the power cable fully. Hang the floor
brush onto the floor park. The powerhead must be stored separately. Store the cleaner in a cool dry location.
Motor Filter Cleaning
Press the handle of the dust canister to remove the dust canister from the cleaner. Remove the filter.
The filter can be cleaned by dusting with a brush. Alternatively a new filter can be used as a replacement.
Note: It is normal that the white central filter in the dust barrel may change colour, which will not
affect its filtration performance.
Key Points:
Please note: when the dust canister or the filter cover is not installed correctly, dust can get through the
motor and cause damage to the vacuum. After cleaning, always check that the dust canister and the filter
cover have been installed correctly.
Caution: Ensure the suction passage is always unobstructed, otherwise the motor
may overheat.
12.
Pre-Motor Filter Cleaning
Remove the rubbish in the dust canister frequently to avoid unnecessary
blockages that may lead to failure of the motor in prolonged occurrences.
IMPORTANT: Do not allow the dust to go past the max. line. The bin
must be emptied before dust reaches the max. line.
Clean the dust canister only after the power cable of the cleaner has been
removed from the power supply.
Hold the dust canister over the rubbish bin (bag), press down the dust
release button of the dust canister, the bottom cover of the dust canister will
automatically open allowing you to clear and empty the dust canister.