Wolf SDC-15 Manual page 7

3D Format and Settings
For additional information about 3D viewing refer to page 54 and pages 59-61 of the SDC-15 User's Manual.
3D Format This control selects the 3D input signal format. Use the [LEFT] and [RIGHT] keys to configure the desired
settings. Press the [OK] key to display the available settings list, then use the [UP]/[DOWN] keys to make your
selection. The [BACK] key returns you to the previous screen.
(*) Some signals may not be embedded with 3D information, thus the image projected may revert to 2D.
Reconfigure such selections manually.
(*) It is recommended to read "On 3D" (reference pages: 59-61) of the User's Manual before watching
3D video images.
Settings: Auto, Side by Side, Top & Bottom, 2D
Auto
Side by Side
Top and Bottom Select this if the 3D signal is the top and bottom method.
2D
2D/3D This feature converts current 2D images into a quasi-3D video image. This effect may not be visible with
certain content.
On
Off
Parallax This function enables fine adjustment of any misalignment of the left and right 3D video images. Adjust these
settings to your preference by using the [LEFT]/[RIGHT] keys. Press the [OK] key to display the adjustment
window. The [BACK] key returns you to the previous screen.
(*) Cannot be adjusted when the "2D/3D" feature is ON.
Settings: -15~15
Crosstalk Cancel This reduces cross-talk within 3D image content. Adjust these settings to your preference by using the
[LEFT]/[RIGHT] keys. Press the [OK] key to display the adjustment window. The [BACK] key returns you to
the previous screen.
(*) May be adjusted during 3D playback but not when the "2D/3D" feature is ON.
White
Red
Green
Blue
Intensity This function adjust for image depth perception. Adjust these settings to your preference by using the
[LEFT]/ [RIGHT] keys. Press the [OK] key to display the adjustment window. The [BACK] key returns you to
the previous screen.
(*) May be adjusted when the "2D/3D" feature is ON.
Settings: 1~5
Sub Title Adjust Select this to automatically identify subtitles and set 3D conversion to On or OFF. Adjust settings to
your preference.
(*) May be adjusted when the "2D/3D" feature is ON.
(*) There may be instances where automatic identification does not work, or certain images are identified
as subtitles. Use the [LEFT]/[RIGHT] keys to configure your desired settings. Press the [OK] key to display
the settings list, then use the [UP]/[DOWN] keys to make your selections. The [BACK] key returns you to
the previous screen.
Settings: On, Off
3D formats are determined automatically.
Select this if the 3D input signal is the side by side method.
Projected as a 2D signal.
Select to convert 2D video images to 3D
Select to NOT convert 2D images into 3D
Settings: -8~8
Settings: -8~8
Settings: -8~8
Settings: -8~8
SDC-15
6