Track Log Setup - Garmin eTrex Setup Manual

2.4

Track Log Setup

These steps make sure that the Garmin eTrex is recording track logs with a sample rate once per second
and recording the track logs to the data card. Setting the frequency of the track log recording to the
highest possible (one second) will ensure the most complete track recording.
First make sure the Track Log is being recorded:
Menu
➢ Press
Tracks
➢ Select
Track Log
➢ If
Next, configure the Track Log recording:
➢ Highlight the
Wrap When Full
➢ Highlight
Record Method
➢ Highlight
Interval
➢ Highlight
OK
select
Color
➢ Highlight
Finally. Configure the Data Card:
➢ Highlight the
Log Track To Data Card
➢ Highlight
Page
twice or key until arriving to
Enter
icon and press
Off
is set to , move the
Setup
button, and press
, and press
, press
Numeric Keypad
, use the
Enter
, press , select your choice, and press
Data Card Setup
button, and press
Track Log Setup
Main Menu
Rocker
to highlight
Enter
to open the
Enter
so that it is
Enter Time
, select , and press
to set interval to
Enter
Enter
, and press
On Enter
, and press
Tracklog Setup Page
Checked
Enter
00 hrs 00 min 01 sec
Enter
Data Card Setup Page
to enter the
Checked
so that it is
, and