BT‐Q890 Super 66‐CH Performance GPS nano …….…………………………………………………………………………………………………………………………………………………………………. 1. Overview Thank you for choosing Qstarz BT‐Q890 Super 66‐Channel ® Performance Bluetooth GPS Receiver, built‐in new generation GPS chipset MTK with 66 channels tracking, provides hyper performance to meet the market’s expectation by fastest position fix with its high speed calculating technology. It combines wireless Bluetooth and wired G‐Mouse functions for your convenience plus 1~5Hz adjustable compatibility giving you even higher positioning and accuracy purpose during eXtreme sports. 2. Package Content GPS Unit BT‐Q890 Cigarette Adapter Mini USB Cable (Optional) Travel Charger (Optional) Driver CD (Optional) User’s Manual Warranty Card 1. 2. 3. 4. 5. ...
Velocity 0.05m/s Time 50 ns RMS Cold/Warm/Hot Start 35/33/1 sec, average Dynamic Condition Altitude <18,000m Velocity <515m/sec Acceleration <4g Protocol GPS Output Data Protocol: NMEA 0183 (V3.01) ‐GGA, GSA, GSV, RMC Baud Rate 115,200 bps Power Built‐in rechargeable Li‐ion battery, Up to 12 hrs after fully charged Bluetooth Standard Fully compliant with Bluetooth V1.2 Bluetooth Profile Serial Port Profiles (SPP), Up to 15 meters Others Size / Weight 62 (L) X 38 (W) X 7 (H) mm Operating ‐ 10 ℃ to + 60 ℃ Temperature ‐ 20 ℃ to + 60 ℃ Storage Temperature 0 ℃ to + 45 ℃ Charging ……….…..…………………………………………………………………………...…………………………………………….... www.Qstarz.com 2 ...
When the unit is not in use or not charged, we suggest disconnecting the unit from the cigarette charger. Otherwise battery drain may result. Note that the built in battery cannot be charged outside the ……….…..……………………………………………………………………………………………………………………...... www.Qstarz.com ...
BT‐Q890 Super 66‐CH Performance GPS nano …….…………………………………………………………………………………………………………………………………………………………………. temperature range 0℃ ~ 45℃. The charging time might be extended if you use the product while charging Do not heat or leave the unit in high temperature or direct sunshine for a long period of time as the built‐in battery capacity will deteriorate, or will become unchargeable. 5. Main features Adopt latest MTK chipset with super 66‐CH performance and high sensitivity to ‐162dBm Up to 12hrs operating time for GPS navigation Fast Position Fix ,Cold start 35s, Warn start 33s,Hot start 1s G‐Mouse + Bluetooth in one: wired and wireless GPS receiver Adjustable 1~5Hz update rate for the demand of eXtreme sports Smart power control – Auto On‐Off function Compatible with Bluetooth Serial Port Profile (SPP) in 15m wirelessly 6. Introduction 6‐1. Appearance 1. Power Button (ON/OFF/Enable 5Hz mode/Disable 5Hz mode) 2. Power jack (mini USB type) 3. Battery status LED (Red/Green) 4. Bluetooth status LED (Blue) 5. GPS status LED (Orange) 6. eXtreme status LED (Green) 7. Internal antenna ……….…..…………………………………………………………………………...…………………………………………….... www.Qstarz.com 4 ...
‐ When the Power LED is Red, battery power is low status. Please recharge. ‐ When the Power LED is Green, the battery is under charging mode. ‐ When the Power LED is blinking, the battery is fully charged. ……….…..……………………………………………………………………………………………………………………...... www.Qstarz.com ...
Satellite, GPS sec.(Orange): GPS not GPS (Orange) GPS position is fixed, powered position not Navigation fix eXtremeSport eXtreme eXtreme Sport Mode is Mode is (Green) on off 6‐4. Function of Auto On‐Off (Power saving mode) BT‐Q890 supports Auto On‐Off (Power saving mode). It can automatically enter sleeping mode after the Bluetooth connectivity is turned off, so the Blue LED will turn to flash every 5 seconds. Thus you can always power it on with very low power consumption. Under power saving mode, when detecting Bluetooth is being connected, BT‐Q890 will auto wake up itself and the blue LED will turn to flash every 2 seconds and GPS Orange LED will be also On. Note: Power saving mode would not function when USB is plugged in. ……….…..…………………………………………………………………………...…………………………………………….... www.Qstarz.com 6 ...
BT‐Q890 Super 66‐CH Performance GPS nano …….…………………………………………………………………………………………………………………………………………………………………. 7. Start to use 7‐1. Fully charge the battery when using at the first time A fully charged battery can last for 12 hours continuously operation (under optimum conditions). 7‐2. Activate the Bluetooth function in your PDA/Smart phone or PC Before activating the Bluetooth function in your PDA/PC, please switch on BT‐Q890 Receiver for paring and check if your device is equipped with Bluetooth function. If not, you may need to acquire an optional CF/SD Bluetooth card or Bluetooth dongle. NOTE 1: BT‐Q890 would be identified as ”Qstarz GPS” under Bluetooth Manager. In further use, you just need to click it to connect to this Bluetooth GPS Receiver. NOTE 2: The pairing procedure is required to execute in the first time only. And the pass code is “0000” if required. NOTE 3: 115,200 Select correct com port and baud rate: under your navigation software (Most of navigation software can auto‐detect Bluetooth Com port, so you do not need to setup manually). ...
7‐3. Create Bluetooth Setting (Windows Mobile 5/6 for Pocket PC) 1. Switch BT‐Q890 on. 2. From the Start menu, click Settings. On the Connections tab, click the Bluetooth icon 3. On the Devices tab, click Add New Device… The settings application will search for your device. When it is found, click Next. 4. Enter the passcode “0000” and click Next. ……….…..…………………………………………………………………………...…………………………………………….... www.Qstarz.com 8 ...
Page 13
BT‐Q890 Super 66‐CH Performance GPS nano …….…………………………………………………………………………………………………………………………………………………………………. 7. Select the COM Ports tab and click New Outgoing Port 8. Select “Qstarz GPS” from the Add a Device list and click Next ……….…..…………………………………………………………………………...…………………………………………….... www.Qstarz.com...
Page 15
…….…………………………………………………………………………………………………………………………………………………………………. 1. From the Start menu, click Settings. On the System tab, click the External GPS icon. On some devices, this item has a different name. 2. On the Programs tab, select any available COM port from the GPS Program Port drop‐down list. The GPS data sent through the GPS Intermediate Driver is streamed to applications through this port. This should not be the same port that your GPS receiver is configured to use. If your application can’t receive GPS data stream, leave GPS Program Port for empty. Applications will use GPS Hardware Port as communication port. 3. On the Hardware tab, select the COM port BT‐Q890 is configured to use from the GPS Hardware Port drop‐down list ……….…..…………………………………………………………………………...…………………………………………….... www.Qstarz.com 12 ...
7‐5. Activate G‐Mouse function via USB connection If your are willing to use G‐Mouse function of Q890, an USB cable and driver installation are needed. Please prepare an USB cable and install the driver. Driver could be downloaded from our website: www.qstarz.com ……….…..……………………………………………………………………………………………………………………...... ...
Beyond Navigation BT‐Q890 Super 66‐CH Performance GPS nano …….…………………………………………………………………………………………………………………………………………………………………. 7‐6. Start your navigation software Activate your navigation software and make sure to select the correct “COM Port”. NOTE 1: In the map software such as TomTom, you might need to change preference and set “Other Bluetooth GPS” according to PDA/phone model. In some case please consult map software company to vary the setting if you have issue on positioning. NOTE 2: There might be specific setting requirement per navigation software. Such as Tomtom, please delete other GPS settings under Tomtom software, and keep one only. ……….…..…………………………………………………………………………...…………………………………………….... www.Qstarz.com 14 ...
Beyond Navigation BT‐Q890 Super 66‐CH Performance GPS nano …….…………………………………………………………………………………………………………………………………………………………………. 9. Safety Notices R&TTE / CE Notice This device is confirmed to comply with the requirements set out in the Council Directive on the Approximation of the Laws of the Member States relating to Electromagnetic Compatibility (89/336/EEC), Low‐voltage Directive (73/23/EEC) and the Amendment Directive(93/68/EEC), the procedures given in European Council Directive 99/5/EC and 89/336/EEC. The equipment was passed. The test was performed according to the following European standards: EN 300 328‐1 EN 301 489‐1 / 17 EN60950 FCC Notice This device complies with Part 15C, Part 15B and ID Application of the FCC rules. Operation is subject to the following two conditions: This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation. Spec. is subject to change without prior notice. All rights reserved. All registered trademark is belong to their respected companies. ……….…..…………………………………………………………………………...…………………………………………….... www.Qstarz.com 16 ...