Download Print this page
Qstarz BT-Q810 Quick Installation Manual

Qstarz BT-Q810 Quick Installation Manual

Qstarz bt-q810: install guide

Advertisement

Quick Links

BT-Q810 Bluetooth GPS Receiver
Thank you for purchasing Qstarz BT-Q810 32-Channel Bluetooth GPS Receiver. It provides 25 hours of
navigation and supports Smart Power control for power saving.
Main features:
Adopt MTK chipset with high sensitivity to -158dBm
Up to 25hrs operating time for GPS navigation
32-Channel all-in-view tracking for fast acquisition and reacquisition
Fast Position Fix ,Cold start 39s, Warn start 36s,Hot start 1s
Vehicle tracking & Location base services
Smart power control – Auto On-Off function
Compatible with Bluetooth Serial Port Profile (SPP) in 10m wirelessly
A. Standard Package
GPS Unit BT-Q810 (1) + Lithium-ION Rechargeable Battery (2) + Cigarette Adapter (3) + Travel Charger (4) + Warranty Card + Quick
Installation Guide. (* Travel Charger plug type might be adjusted according to corresponding countries.)
1.
B. Appearance
1. Power jack (mini USB type)
2. Power switch
3. Battery status LED (Red/Green)
4. Bluetooth status LED (Blue)
5. GPS status LED (Orange)
6. Internal antenna
C. Battery installation
C-1 Put Battery in place: Press the PUSH button on the bottom side of the unit (1) and pull out the battery cover. Insert battery in the
unit (2) and put battery cover on to the cabinet (3), then push down and force it forward to fit firmly (4).
1.
C-2 Take Battery out: Press the PUSH button on the bottom side of the unit (1) and pull out the battery cover (2). Then take out the
battery from the unit (3).
1.
D. Charging your battery
For the first time using the BT-Q810, please charge battery until it is fully
charged. Take the power cable and connect it to the power jack (mini USB
type) and recharge through travel charger or car cigarette adaptor. This will
begin to charge the battery. Charging time is 3 hours typically.
- When the Power LED is Red, battery power is low status. Please recharge.
- When the Power LED is Green, the battery is under charging mode.
- When the Power LED is blinking, the battery is fully charged.
BT-Q810 Quick Installation Guide
2.
3.
2.
2.
4.
1
3.
3.
4.
1

Advertisement

loading

Summary of Contents for Qstarz BT-Q810

  • Page 1 Compatible with Bluetooth Serial Port Profile (SPP) in 10m wirelessly A. Standard Package GPS Unit BT-Q810 (1) + Lithium-ION Rechargeable Battery (2) + Cigarette Adapter (3) + Travel Charger (4) + Warranty Card + Quick Installation Guide. (* Travel Charger plug type might be adjusted according to corresponding countries.) B.
  • Page 2 Blue LED will turn to flash every 5 seconds. Thus you can always power it on with very low power consumption. Under power saving mode, when detecting Bluetooth is being connected, BT-Q810 will auto wake up itself and the blue LED will turn to flash every 1 second and GPS Orange LED will be also On.