Qstarz BT-Q815 Quick Installation Manual

BT-Q815 Bluetooth GPS Receiver
Thank you for purchasing Qstarz BT-Q815 Mini Solar MTK Bluetooth GPS Receiver. Next Generation
GPS with same sensitivity as SiRF III but even powerful by SOLAR add-on.
Main features:
Adopt MTK chipset with high sensitivity to -158dBm
Up to 30hrs operating time for GPS navigation
51-Channel performance for fast acquisition and reacquisition
Fast Position Fix ,Cold start<36s, Warm start<33s, and Hot start<1s
Vehicle tracking & Location base services
Compatible with all navigation software
Dual Power Supply - Built in rechargeable Lithium ion battery & Solar power
Compatible with Bluetooth Serial Port Profile (SPP) in 10m wirelessly
A. Standard Package
GPS Unit BT-Q815 (1) + Lithium-Ion Rechargeable Battery (2) + Cigarette Adapter (3) + Travel Charger (4) + Warranty Card + Quick
Installation Guide. (* Travel Charger plug type might be adjusted according to corresponding countries.)
1.
B. Appearance
C. Charging your battery
For the first time using the BT-Q815, please charge battery until it is fully charged. Take the power
cable and connect it to the power jack and recharge through travel charger or car cigarette
adaptor. This will begin to charge the battery. Charging time is 4 hours typically.
- When the Power LED is blanking with Green, battery power is low status / under charging mode.
- When the Power LED is On with Green, the battery is fully charged.
BT-Q815 Quick Installation Guide
2. 3. 4.
1