Table of Contents
Advertisement
Tuning into a preset station
You can easily tune into a preset station.
Remember that you must store stations first. If you
have not stored them yet, see page 6.
1
Select the band (FM1 – 3 or AM) you
want.
FM1
2
Select the number (1 – 6) for the preset
station you want.
FM2
FM3
AM
Other convenient tuner functions
Scanning broadcast stations
When you press SCAN while listening to the radio,
station scanning starts. Each time a broadcast is
tuned in, scanning stops for about 5 seconds (tuned
frequency number flashes on the display), and you
can check what program is now being broadcasted.
If you want to listen to that program, press the same
button again to stop scanning.
Selecting FM reception sound
When an FM stereo broadcast is hard to receive:
Press MO RND while listening to an FM stereo
broadcast. The sound you hear becomes monaural
but reception will be improved.
Lights up when receiving an
FM broadcast in stereo.
To restore the stereo effect, press the same
button again.
7 7
Advertisement
Table of Contents
