move from a powder detergent and switch to a liquid detergent
instead.
Installation
IMPORTANT: THIS INSTALLATION MUST BE COMPLETED
BY A SUITABLY QUALIFIED PERSON. BAUMATIC ONLY
SANCTION
INSTRUCTION MANUAL. YOU SHOULD KEEP THE TRANSIT
PACKAGING, IN CASE YOU NEED TO TRANSPORT THE
MACHINE IN THE FUTURE.
Removing the transit bolts
IMPORTANT: Before installing or operating the washing machine,
YOU MUST remove the transit bolts that hold the drum in position
whilst the appliance is being transported.
The transportation bolts are designed for clamping anti-vibration
components inside of the washer-dryer during the transportation
process.
1) Remove the back cover.
2) Remove the three bolts on the rear side and
take out the synthetic stabilizers from within the
machine.
3) Replace the back cover. The convexity must face
to the outside and the back cover must be inserted
from the two gaps.
THE
INSTALLATION
GIVEN
IN
THIS
26