The Product Does Not Work Properly; Self-Diagnosis Display - Sony DSC-WX220 Instructions For Use Manual

[192] Troubleshooting
The Clock Set screen appears when you turn on the
product.
Set the date and time again.
The internal rechargeable backup battery has discharged. Insert a charged battery, and
set aside for 24 hours or more with the power left off.
[193] Troubleshooting
The number of recordable images does not decrease, or
decreases two images at a time.
This is because the compression rate and the image size after compression change
depending on the image when you shoot a JPEG image.
[194] Troubleshooting

The product does not work properly.

Turn off the product. Remove the battery pack and insert it again. If the product is hot,
remove the battery pack, and allow it to cool down before trying this corrective procedure.
If an AC-UD10/AC-UD11 AC Adaptor (sold separately) is used, disconnect the power
cord. Connect the power cord and turn on the product again. If the product repeats the
same error often or still does not work after trying these solutions, consult your Sony
dealer or local authorized Sony service facility.
[195] Troubleshooting

Self-diagnosis display

If a code starting with a letter of the alphabet appears, the self-diagnosis function on this
product is working. The last two digits (indicated by □□) will differ depending on the state of
Troubleshooting
Troubleshooting
Troubleshooting
Messages Messages
Others
Others
Others