Basic Operations; Turning On The Power - JVC 0302KKSMDTJEIN Instructions Manual

Turning on the power

1
Turn on the power.
"HELLO" appears on the
display.
Note on One-Touch Operation:
When you select a source in step 2 below, the
power automatically comes on. You do not have
to press this button to turn on the power.
2
Select the source.
To select the FM or AM tuner, press FM AM
DAB repeatedly.
DAB
To select TAPE, or CD changer (or "LINE IN"),
press TAPE CD-CH repeatedly.
TAPE
* Without connecting to the CD changer, you
cannot select the CD changer as the source.
** If "LINE IN" does not appear on the display,
see page 27 and select the external input
("LINE IN").
To select the DAB tuner, press and hold
FM AM DAB.
DAB
EQ
1 3
FM1 FM2
AM FM3
TAPE
CD*
(or LINE IN)**
FM / AM
DAB

BASIC OPERATIONS

3
Adjust the volume.
Volume level appears.
4
Adjust the sound as you want.
(See pages 22 – 24.)
To drop the volume in a moment
Press briefly while listening to any
source. "ATT" starts flashing on the display, and
the volume level will drop in a moment.
To resume the previous volume level, press the
button briefly again.
• If you turn the control dial clockwise, you can
also restore the sound.
To turn off the power
Press and hold
on the display.
Note:
When you use this unit for the first time, set the built-in
clock correctly, see page 25.
DAB
TAPE
2
To increase the volume.
To decrease the volume.
Volume or audio
level (see page 27)
meter
until "SEE YOU" appears
7