Advertisement
I. SAFETY SECTION
This page contains various warnings and cautions found throughout the Oil Furnace
Manual. Please read and comply with the statements below.
cWARNING AND CAUTIONS:
cWARNING: This furnace is not to be used as a construction heater. See Page 1.
c CAUTION MUST BE TAKEN NOT TO EXCEED 90° ROTATION (OF THE FLUE
ELBOW) COUNTERCLOCKWISE OR RIGHT FROM THE VERTICAL POSITION.
See Page 2.
cWARNING: The predetermined limit location on this Crown oil fired furnace has been
tested and approved by Thermo Products, LLC. Any attempt to relocate this safety control
or replace this safety control with a control that is not approved, or is incompatible, may
result in personal injury, substantial property damage or death. See Page 5.
cWARNING: THE HEAT EXCHANGER MUST BE CLEANED BY A QUALIFIED
SERVICE PERSON. See Page 8.
cCAUTION: DO NOT ATTEMPT TO MAKE REPAIRS YOURSELF! See Page 9.
cWARNING: The area around the furnace should be kept free and clear of combustible
liquids and material, especially papers and rags. See Page 9.
cWARNING: NEVER burn garbage or refuse in your furnace. Never try to ignite oil by
tossing burning papers or other material into your furnace. See Page 9.
cWARNING: Crown oil furnaces are designed to burn No. 1 or No. 2 distillate fuel oil.
NEVER USE GASOLINE OR A MIXTURE OF OIL AND GASOLINE. See Page 9.
cCAUTION: DO NOT ATTEMPT TO START THE BURNER WHEN:
1. Excess oil has accumulated.
2. The furnace is full of vapors.
3. The combustion chamber is very hot.
IF ONE OR MORE OF THESE CONDITIONS EXIST, CONTACT A QUALIFIED
SERVICE PERSON. See Page 9.
i
Hide quick links:
Advertisement
