SETTING THE POSITION MEMORY
This function changes the setting of the position memory for panning,
tilting(VN-C2U
Procedure
1. In the menu bar, click [V.Networks] - [Position Memory].
2. Select the V.NETWORKS for which you want to change the position
memory.
* The current registration information is displayed in the [PAN/TILT/ZOOM]
field.
3. Operate the panning, tilting and zooming to set the conditions you want
to register.
4. In the position memory bank from 1 to 10 (from 1 to 6 with the VN-C2U),
click the [Memory] button with the memory number you want to use.
Now the position memory setting is complete.
34
VN-C3U) and zooming (VN-C3U only).
•