HIKVISION 9100HFI-ST Series User Manual page 135

User Manual of Digital Video Recorder
Note: Time periods shall not be repeated or overlapped.
Figure 8. 10 Set Arming Schedule of Alarm Input
5. Select Linkage Action tab to set alarm response actions of the alarm input (please refer to Chapter 8.6).
6. If necessary, select PTZ Linking tab and set PTZ linkage of the alarm input.
Set PTZ linking parameters and click
settings of the alarm input.
Note: Please check whether the PTZ or speed dome supports PTZ linkage.
One alarm input can trigger presets, patrol or pattern of more than one channel. But presets, patrols and
patterns are exclusive.
Figure 8. 11 Set PTZ Linking of Alarm Input
7. If you want to set alarm settings of another alarm input, repeat the above steps or just copy the above
settings to it by clicking
to save the settings. Click
in Alarm Input Settings interface.
134
to complete the