Table of Contents
Advertisement
Data - Routing Screen
RIP
Enable RIP
Static Routing
Static Routing
Table Entries
Properties
Buttons
Save
60
Figure 29: Routing Screen
Check this to enable the RIP (Routing Information Protocol) feature
of the BLW-54PM. The BLW-54PM supports RIP 1 only.
This list shows all entries in the Routing Table.
•
The Properties area shows details of the selected item in the list.
•
Change any the properties as required, then click the Update
button to save the changes to the selected entry.
•
Destination Network - The network address of the remote LAN
segment. For standard class C LANs, the network address is the
first 3 fields of the Destination IP Address. The 4th (last) field
can be left at 0.
•
Network Mask - The Network Mask for the remote LAN
segment. For class C networks, the default mask is
255.255.255.0
•
Gateway IP Address - The IP Address of the Gateway or
Router which the BLW-54PM must use to communicate with the
destination above. (NOT the router attached to the remote seg-
ment.)
•
Metric - The number of hops (routers) to pass through to reach
the remote LAN segment. The shortest path will be used. The
default value is 1.
Save the RIP setting. This has no effect on the Static Routing Table.
Advertisement
Table of Contents
