Planex BLW-54PM User Manual page 15

If you can't connect
If the BLW-54PM does not respond, check the following:
•
The BLW-54PM is properly installed, LAN connection is OK, and it is pow-
ered ON. You can test the connection by using the "Ping" command:
•
Open the MS-DOS window or command prompt window.
•
Enter the command:
ping 192.168.1.1
If no response is received, either the connection is not working, or your
PC's IP address is not compatible with the BLW-54PM's IP Address. (See
next item.)
•
If your PC is using a fixed IP Address, its IP Address must be within the range
192.168.1.2 to 192.168.1.254 to be compatible with the BLW-54PM's default
IP Address of 192.168.1.1. Also, the Network Mask must be set to
255.255.255.0.
•
Ensure that your PC and the BLW-54PM are on the same network segment. (If
you don't have a router, this must be the case.)
•
Ensure you are using the wired LAN interface. The Wireless interface can only
be used if its configuration matches your PC's wireless settings.
15