Planex BLW-54PM User Manual page 46

Login Password
RAS Plan
Server Address
Connection
Behavior
Auto-disconnect
Idle Time-out
Buttons
Default
Copy from PC
Save
Cancel
46
Enter the password for the login name above.
For SingTel customers only, select the RAS plan you are on.
This is not required for PPPoE or SingTel RAS.
For PPTP, L2TP and BPA, enter the Server address as provided by
your ISP.
Select the desired option:
•
Automatic Connect/Disconnect
An Internet connection is automatically made when required,
and disconnected when idle for the time period specified by the
Auto-disconnect Idle Time-out.
•
Manual Connect/Disconnect
You must manually establish and terminate the connection.
•
Keep alive (maintain connection)
The connection will never be disconnected by this device. If dis-
connected by your ISP, the connection will be re-established
immediately. (However, this does not ensure that your Internet
IP address will remain unchanged.)
This field has no effect unless using the Automatic Con-
nect/Disconnect setting.
If using this setting, enter the desired idle time-out period (in
minutes). After the connection to your ISP has been idle for this
time period, the connection will be terminated.
Inserts the default MAC address into the MAC address field. You
must click Save to actually change the address used.
Inserts the MAC address from your PC into the MAC address field.
You must click Save to actually change the address used.
Save your changes to the BLW-54PM.
Reverse any changes made since the last Save.