JVC YU30052-513-2 Instructions Manual page 14

14
START/STOP
VISS
RM-V704U
(provided with GR-AX460,
optional for GR-AX260)
Record-Standby
Normal
Record
Record-Standby
RECORDING
FEATURE:
PURPOSE:
OPERATION: Auto Marking
NOTES:
FEATURE:
PURPOSE:
OPERATION: 1) Set AUTO PAUSE to "ON". When
AUTO PAUSE
NOTES:
Up
Upside down
Record-Standby
Down
Basic Features (cont.)
Index Code Marking
To give you automatic access to any
selected point on a recording. Auto
Marking and Manual Marking are
available.
An index code is always marked to start
the first recording on a new date after a
cassette is inserted.
Manual Marking
1) Press VISS once to place index code.
INDEX blinks in the viewfinder
during marking.
If VISS is pressed during Record–
Standby mode, the mark is placed
where START/STOP is pressed.
If the date changes during a record-
ing, it becomes the first recording of
the new date and an index mark is
placed at that point.
AUTO PAUSE SYSTEM (GR-AX460
only)
To automatically stop recording when
the camcorder is pointed down,
preventing accidental recordings of the
ground, your feet, etc.
the camcorder is tilted down by a
large degree from its horizontal
position during recording, the
Record-Standby mode is automati-
cally engaged. "AUTO PAUSE"
appears in the viewfinder.
The Auto Pause System is also
effective when the camcorder is
pointed up, or is positioned upside
down.
Auto Pause also works when the
camcorder is twisted by a large
degree to the left or right.
When you want to shoot in any of the
aforementioned positions, make sure
you set AUTO PAUSE to "OFF".