Fujitsu Siemens Computers Primergy S60 Technical Configuration Manual page 54

Configuration Settings for QLA2200
3. Select Configuration Settings (see table 1 on page 49) from the Fast!UTIL
Options menu and press Enter Ú.
4. Select Extended Firmware Settings (submenu no. 1.6; see table 2 on page 49)
from the Configuration Settings menu and press Enter Ú.
5. Select Connection Options (submenu no. 1.6.3; see table 9 on page 51)and
press Enter Ú.
6. Set the appropriate option value corresponding to the table below and press
Enter Ú:
Loop configuration
Arbitrated Loop
Fabric
7. Press [Esc] to return to the Configuration Settings menu.
8. Select Advanced Adapter Settings (submenu no. 1.5; see table 2 on page 49)
from the Configuration Settings menu and press Enter Ú.
9. Select PortDownRetryCount (submenu no. 1.5.9; see table 6 on page 50)and
press Enter Ú.
10. Set the appropriate value (60) and press Enter Ú(see also table 8 on
page 51).
11. Press [Esc] to return to the Fast!UTIL Options menu.
12. When prompted to save changes made to the current adapter, select Save
Changes and press Enter Ú.
13. If there are more adapters to configure, choose Select Host Adapter in the
Fast!UTIL Options menu and repeat steps 3 through 9 for each adapter.
14. Press [Esc] to exit Fast!UTIL.
15. Reboot the host.
I
For more detailed description of all parameters refer to Hardware Instal-
lation Guide for the QLA2200/2200F/2202F on the ServerBooks-CD
(see "Related Publications" on page 55).
48
option
Loop Only
Point to Point Only
Appendix
value
0
1
P15355-P111-Z139-5-7619