Using The Hot Water Function
The hot water function can be used for topping up your coffee and is suitable for making tea.
ß Place a cup or container under the steam/hot water arm and activate the hot water function by turning
the steam and hot water control dial to the hot water setting
ß Once you have dispensed the required amount of hot water into the cup or container, to stop the hot
water flow, turn the steam/hot water control dial back to the 'O' position (32).
ß Remove the cup or container and ensure the steam/hot water arm is over the drip tray to catch any
remaining drips of water (33).
Sleep Mode
After 30 minutes of non-use the espresso machine will automatically switch to sleep mode. When the
machine is in sleep mode the power light will slowly flash. After a further 1½ hours of non-use, the
espresso machine will turn off.
20
31
(31).
32
33