Installation; Mounting Position - Bosch AN bullet 4000 User Manual

8 en | Installation
6

Installation

6.1 Mounting position

To prevent injury, this apparatus must be securely attached to
the floor/wall in accordance with the installation instructions.
NOTICE! The image sensors in modern cameras are highly sensitive and require
special care for proper performance and extended lifetime. Follow the
guidelines for optimum results with your camera:
– Do not expose to direct sunlight or bright spotlights in operating and
nonoperating conditions.
– Avoid bright lights in the field of view of the camera. Bright lights cause
a "smearing" effect, which is visible as white lines above and below the
highlight. Prolonged exposure to bright lights may cause bleaching of the
sensor's color filters. This will be visible as colored spots in the picture
and is irreversible.
WARNING! The mounting surface, mounting screws/plugs, and junction box must be
stable and capable of supporting a maximum load of 4 kg (8.82 pounds).
Mounting to an improper surface or using improper mounting material can
cause camera malfunction and is a potential safety hazard.
WARNING! Make sure that appropriate mounting screws and anchors are used for the
surface to which the camera is mounted. The supplied universal mounting
screws can be used with most plastic anchors, please confirm compatibility
before mounting the camera.
CAUTION! To prevent humidity problems, the camera must be installed in dry
conditions, and the cable leads should be sealed after they are connected.
Bosch Security Systems
360°
* 1st Axis
360°
* 3rd Axis
User Manual
960H Day/Night Bullet Camera
90°
* 2nd Axis
2012.11