NetMan 101 Installation And Operation Manual page 7

Fig. 3 Connecting Network Adapter NetMan 101 to an UPS
Adapter connects to the twisted-pair Ethernet (10 base T) network via RJ-45
connector.
Adapter communicates with a NMS via the Ethernet network. Adapter includes SNMP
agent that implements Management Information Base (MIB) and, at the same time,
communicates with the UPS via a serial interface, and thus creates a data interconnection
between the systems.
Network Management Stations (NMS) can receive critical states of the UPS (traps)
and are able to monitor the important data about the UPS, for example input and output
voltages, battery status, etc. Moreover, the set of SNMP commands can remotely activate
various instructions for the UPS and control the supply of power from the UPS to the
connected load. For example it supports a remote restart of connected equipment.
8